Landscape Fabric Instructions

1.Do not lay weed mat too tightly, just land on the ground naturally.
2.Leave 1-2 meters at both ends of the ground, if not fix them with nails, because the weed mat will shrink over time.
3.Fertilize large trees, about 1 meter away from the trunk.
4.Fertilize the small tree, about 10cm away from the trunk.
5.Can be inspected regularly to ensure that the edges are firmly fixed and prevent high winds from tearing.
6.The trunk should not be wrapped too tightly, so as not to form stem streaks with the thickening of the crown.
7.Try to level the land before laying weed control fabric.
8.Keep the surface of the Woven Landscape Fabric free of soil to prevent weeds from growing on the surface of the weed-proof cloth and root penetration and damage to the weed-proof cloth.
9.Soil or stone fixing weed control cloth:Save money but waste time.Grass does not grow under the grass-proof cloth, but there is soil on it, which will inevitably grow grass, which is not beautiful.
10.Plastic nail fixation method:barbed floor pegs.The service life can reach about 5 years.16 cm is the most widely used.Nail one between 1-1.5 meters, or per 0.5 meter. The disadvantage of this fixing method is that it is easy to strain the landscape fabric,when it is necessary to lift the ground cover to fertilize. Because of the barbed structure of the ground nail itself, it is easy to break the warp and weft when pulling out, which affects the service life.
11.U staples fixation method:u staple made of carbon steel, at least 6 years warranty, expensive and can be mixed with plastic pegs. U staples used on the periphery, and plastic ground nails in the middle. In this way, the landscape staple will not damage the weed control fabric when the land need fertilizing and the garden weed barrier need lifting and pulling aside.


Post time: Aug-05-2022